How many guitar strings are there?

Most standard guitars have six strings. However, some guitars have 7, 8, or even 12 strings for extended range or special styles. For beginners and most players, the six-string setup is the norm and offers all the range needed for most genres

What are the Names of Guitar Strings?

The strings are named based on pitch: E, A, D, G, B, and high E. Starting from the thickest (lowest pitch) to the thinnest (highest pitch), the names go: E, A, D, G, B, E. A common acronym to remember the order of strings from thickest to thinnest is: Eddie Ate Dynamite; Good Bye Eddie.

What is the order of guitar strings?

From the thickest (top when holding the guitar) to the thinnest (bottom), the order is: 6th (Low E), 5th (A), 4th (D), 3rd (G), 2nd (B), 1st (High E). Knowing the order helps with tuning, learning chords, and following guitar tabs.

What are some common materials for guitar strings?

Strings can be made from stainless steel, nickel, nylon, phosphor bronze, flat wound

How to Choose Guitar Strings?

If you play electric guitar, nickel-plated steel strings are the most common and work well for most genres, If you’re into blues or vintage rock, pure nickel gives a warmer tone, Stainless steel is a good pick if you want a sharp, bright sound with less corrosion, For acoustic guitars, phosphor bronze strings offer a rich tone with warmth and brightness, 80/20 bronze strings are another option, giving a brighter, punchier sound, Nylon strings are only for classical guitars or beginner nylon-string acoustics; never use them on a steel-string guitar.

What are winding types for guitar strings?

Roundwound strings, flatwound strings, half-round strings

What are roundwound guitar stirngs?

These are the most common type of winding type for guitar strings. They’re bright and have a textured feel, but can be noisy when fingers slide across.

What are flatwound guitar strings?

Smoother and darker sounding, flatwounds are popular in jazz and blues. They produce less finger noise but feel stiffer. They have a very smooth feel and produce a mellow, warm, and dark tone with less sustain and a more percussive attack.

What are half-wound guitar strings?

These are a middle ground between roundwound and flatwound strings. They offer a smoother feel than roundwounds with more brightness than flatwounds, but can be more expensive.

What type of strings are bass guitar strings?

These are thick, low-tuned strings made for bass guitars. They’re available in roundwound, flatwound, or tapewound.

What type of strings are classical guitar strings?

Classical guitar strings should only be made from nylon, as steel strings can damage a classical guitar’s neck and body.

What type of guitar strings to use on acoustic guitars?

Use bronze or phosphor bronze strings, usually with steel cores. Never use nylon or electric strings on an acoustic.

What type of strings should I use on an electric guitar?

Use nickel or stainless steel strings for an electric guitar. Acoustic-specific strings won’t work properly with magnetic pickups.

What are guitar string sizes or gauges?

String gauge refers to how thick the strings are. Thinner strings are easier to play; thicker ones are louder and more durable. Guitar strings come in extra light or super light (0.008-0.038), light (0.009-0.042), medium (0.01-0.046), and heavy (0.011-0.052)

How do I care for guitar strings?

Keep your strings clean by wiping them down after each use. Oils and sweat can make them corrode faster. Store your guitar in a case to protect strings from humidity and dust.

How Often Should I Replace My Guitar Strings?

If you play daily, change strings every 2–4 weeks. Occasional players can wait 1–2 months. Replace them when they sound dull, feel rough, or are hard to tune.

Can I Boil Guitar Strings to Clean Them?

Yes, boiling can temporarily remove grime and restore brightness, especially on bass strings. But it weakens the metal, so it’s not a long-term solution and we recommend just buying new strings instead.

Why Do My Guitar Strings Keep Breaking?

Common causes include sharp bridge edges, worn frets, over-tightening, or old strings. Make sure your guitar is properly set up and check for sharp spots.

What are some popular brands of guitar string?

D'Addario, NYXL (by D'Addario), Ernie Ball, Elixir, GHS Strings, Stringjoy, Fender

Steel vs nylon strings – which is better?

Neither is “better”; just better for you and your needs as a guitarist. Steel is for acoustic and electric guitars with bright, strong tones; nylon is for classical guitars and gives a soft, mellow sound.

How much are guitar strings?

Most sets cost between $5 and $20, depending on quality, type, and coating.

What are guitar strings made of?

Guitar strings are made from a variety of materials depending on the type of guitar. Electric guitar strings are usually made of steel, nickel, or stainless steel. Acoustic strings are often made from bronze, phosphor bronze, or brass. Classical guitar strings use nylon or a combination of nylon and silver-plated copper. Each material affects the tone, feel, and durability of the strings.

Can you put electric guitar strings on an acoustic?

Technically yes, but it’s not recommended. Electric guitar strings are made for magnetic pickups and won’t sound right on an acoustic. They also have lower tension, which can affect the guitar’s tone and feel. For the best sound and playability, use acoustic strings on acoustic guitars.

Does acoustic string gauge make a difference?

Yes, it makes a major difference. Lighter gauges are easier to play and better for fingerpicking, but they can sound thinner and break more easily. Heavier gauges produce a fuller, louder sound and are better for strumming, but they’re harder on the fingers and may require a stronger setup.

How do I choose electric strings?

Start by considering your playing style and tone preference. If you want a bright tone and long life, stainless steel is great. For a warmer sound, try pure nickel. Light gauges are easier to play and bend, while heavier gauges offer more sustain and volume. Also, match your string type to your guitar’s scale length and setup.

Collings D1A Hill Country Sunburst Acoustic Guitar with Adirondack Spruce & Honduran Mahogany

Case Card for Collings D1A Hill Country Sunburst Acoustic Guitar with Adirondack Spruce & Honduran Mahogany

Case for Collings D1A Hill Country Sunburst Acoustic Guitar with Adirondack Spruce & Honduran Mahogany

All photos are of the actual product. Learn More

Description
Media Gallery
Downloads

The Collings D1A Hill Country Sunburst is a powerful, workhorse dreadnought refined by one of the most respected shops in modern acoustic guitar building. Blending old-world inspiration with Collings’ relentless precision, this instrument showcases the company’s Hill Country construction and voicing approach, a build style aimed at delivering a slightly looser, more responsive feel with enhanced air movement and a wide dynamic range.

At the heart of the voice is an Adirondack spruce top, chosen for its headroom, clarity, and ability to reward a strong right hand. Finished in a rich Hill Country Sunburst under an ultra-thin high-gloss nitrocellulose lacquer, the top is paired with Honduran mahogany back and sides for dry, woody fundamentals, quick note bloom, and a muscular midrange that defines classic dreadnought tone. Sitka spruce braces, carved into Collings’ Hill Country scalloped X-pattern with no tongue brace, further increase responsiveness and give the guitar a broken-in feel straight out of the case.

Playability is equally considered. The Honduran mahogany neck features Collings’ Hill Country profile, full but never bulky, transitioning from a Modified C to a subtle Modified V, softened by a rounded fingerboard edge. A compound 14 inch to 26 inch radius ebony fingerboard with gold mother-of-pearl dot inlays allows for comfortable first-position work and effortless movement higher up the neck. The 1 3/4 inch aged bone nut and cutthrough saddle feed energy efficiently into an ebony belly-style bridge with 2 5/16 inch spacing, offering excellent string-to-string separation for both flatpicking and fingerstyle.

Visually, this D1A leans into understated craftsmanship. Tortoise body binding frames the sunburst top, while ebony fingerboard binding adds a crisp, elegant line along the neck. The square peghead with volute is capped in ebony with no logo on the face and a stamped Collings mark on the rear, paired with relic nickel Waverly tuners for smooth, vintage-inspired function. A walnut 1-style backstrip and a hand-poured rosette ring drawn from the matching pickguard set provide boutique-level detail, echoed again in the hand-poured tortoise pickguard, heel cap, and tail wedge.

Finished in ultra-thin high-gloss nitro on both body and neck, this guitar weighs in at just 4 lbs 5 oz, remarkably light for a dreadnought and a major contributor to its lively, immediate response. It ships strung with D’Addario EJ-17s and housed in a deluxe hardshell case, ready for stage, studio, or long sessions at home.

The Collings D1A Hill Country Sunburst is for players who want traditional dreadnought authority paired with modern refinement, a guitar that delivers explosive power when pushed, rich fundamental warmth when played gently, and the unmistakable feel of a finely tuned, hand-built instrument.

Other specifications Include:

Top Adirondack spruce
Back & Sides Honduran Mahogany
Construction Hill Country Build and Voicing
Neck Honduran mahogany
Body Binding Tortoise
Fingerboard Binding Ebony
Peghead Binding None
Bridge Ebony belly-style with 2 5/16" spacing
Fingerboard Ebony with gold MOP dots
Fingerboard Radius 14" - 26" compound
Bridge Pins/End Pin Ebony
Nut Aged bone, 1 3/4"
Saddle Aged bone, cutthrough
Neck Profile Hill Country (smaller) Full but not overly chunky Modified C to Modified V with a rounded fingerboard edge.
Peghead Profile Square with volute
Neck Joint Mortise & tenon hybrid
Truss Rod Fully adjustable
Frets Medium 18% nickel-silver
Peghead Veneer Ebony with no Collings Logo on front and stamped logo on back
Tuners Relic Nickel Waverly
Backstrip 1-style (Walnut)
Rosette Hand-poured ring from matching pickguard set
Scale Length 25 1/2"
Brace Material Sitka spruce
Brace Pattern Hill Country scalloped X-brace (no tongue brace)
Body Finish High Gloss ultra-thin nitrocellulose lacquer
Neck Finish High Gloss ultra-thin nitrocellulose lacquer
Pickguard Hand-poured tortoise w/ matching rosette ring, wedge, and heel cap
Strings D'Addario EJ-17
Case Deluxe hardshell case
4 lbs 5 oz
36243

For more information about the Collings D1A HC, please contact us.

Manufacturer: Collings
Body Style: Dreadnought
Actual Weight: 4.5
Model: D1A Hill Country
Series: Hill Country
Condition: Brand New

Product Images

Product Videos

Play

Collings OM1A Hill Country-Adirondack Spruce & Honduran Mahogany - No Talking Demo with Matt Chulka

Downloads

New 1 in stock

SKU: 36243

Weight: 4 lbs 5 oz

Collings D1A Hill Country Sunburst - Adirondack Spruce & Honduran Mahogany #36243

$10,145.00

Condition:: New

Quantity:

Current Stock: 1

Adding to cart… The item has been added

Free Shipping inside lower 48 states

48 Hour Return Policy

You can demo any guitar by making an appointment with our team. Just reach out to us through a message, email, or chat!

Description

Other specifications Include:

Top Adirondack spruce
Back & Sides Honduran Mahogany
Construction Hill Country Build and Voicing
Neck Honduran mahogany
Body Binding Tortoise
Fingerboard Binding Ebony
Peghead Binding None
Bridge Ebony belly-style with 2 5/16" spacing
Fingerboard Ebony with gold MOP dots
Fingerboard Radius 14" - 26" compound
Bridge Pins/End Pin Ebony
Nut Aged bone, 1 3/4"
Saddle Aged bone, cutthrough
Neck Profile Hill Country (smaller) Full but not overly chunky Modified C to Modified V with a rounded fingerboard edge.
Peghead Profile Square with volute
Neck Joint Mortise & tenon hybrid
Truss Rod Fully adjustable
Frets Medium 18% nickel-silver
Peghead Veneer Ebony with no Collings Logo on front and stamped logo on back
Tuners Relic Nickel Waverly
Backstrip 1-style (Walnut)
Rosette Hand-poured ring from matching pickguard set
Scale Length 25 1/2"
Brace Material Sitka spruce
Brace Pattern Hill Country scalloped X-brace (no tongue brace)
Body Finish High Gloss ultra-thin nitrocellulose lacquer
Neck Finish High Gloss ultra-thin nitrocellulose lacquer
Pickguard Hand-poured tortoise w/ matching rosette ring, wedge, and heel cap
Strings D'Addario EJ-17
Case Deluxe hardshell case
4 lbs 5 oz
36243