How many guitar strings are there?

Most standard guitars have six strings. However, some guitars have 7, 8, or even 12 strings for extended range or special styles. For beginners and most players, the six-string setup is the norm and offers all the range needed for most genres

What are the Names of Guitar Strings?

The strings are named based on pitch: E, A, D, G, B, and high E. Starting from the thickest (lowest pitch) to the thinnest (highest pitch), the names go: E, A, D, G, B, E. A common acronym to remember the order of strings from thickest to thinnest is: Eddie Ate Dynamite; Good Bye Eddie.

What is the order of guitar strings?

From the thickest (top when holding the guitar) to the thinnest (bottom), the order is: 6th (Low E), 5th (A), 4th (D), 3rd (G), 2nd (B), 1st (High E). Knowing the order helps with tuning, learning chords, and following guitar tabs.

What are some common materials for guitar strings?

Strings can be made from stainless steel, nickel, nylon, phosphor bronze, flat wound

How to Choose Guitar Strings?

If you play electric guitar, nickel-plated steel strings are the most common and work well for most genres, If you’re into blues or vintage rock, pure nickel gives a warmer tone, Stainless steel is a good pick if you want a sharp, bright sound with less corrosion, For acoustic guitars, phosphor bronze strings offer a rich tone with warmth and brightness, 80/20 bronze strings are another option, giving a brighter, punchier sound, Nylon strings are only for classical guitars or beginner nylon-string acoustics; never use them on a steel-string guitar.

What are winding types for guitar strings?

Roundwound strings, flatwound strings, half-round strings

What are roundwound guitar stirngs?

These are the most common type of winding type for guitar strings. They’re bright and have a textured feel, but can be noisy when fingers slide across.

What are flatwound guitar strings?

Smoother and darker sounding, flatwounds are popular in jazz and blues. They produce less finger noise but feel stiffer. They have a very smooth feel and produce a mellow, warm, and dark tone with less sustain and a more percussive attack.

What are half-wound guitar strings?

These are a middle ground between roundwound and flatwound strings. They offer a smoother feel than roundwounds with more brightness than flatwounds, but can be more expensive.

What type of strings are bass guitar strings?

These are thick, low-tuned strings made for bass guitars. They’re available in roundwound, flatwound, or tapewound.

What type of strings are classical guitar strings?

Classical guitar strings should only be made from nylon, as steel strings can damage a classical guitar’s neck and body.

What type of guitar strings to use on acoustic guitars?

Use bronze or phosphor bronze strings, usually with steel cores. Never use nylon or electric strings on an acoustic.

What type of strings should I use on an electric guitar?

Use nickel or stainless steel strings for an electric guitar. Acoustic-specific strings won’t work properly with magnetic pickups.

What are guitar string sizes or gauges?

String gauge refers to how thick the strings are. Thinner strings are easier to play; thicker ones are louder and more durable. Guitar strings come in extra light or super light (0.008-0.038), light (0.009-0.042), medium (0.01-0.046), and heavy (0.011-0.052)

How do I care for guitar strings?

Keep your strings clean by wiping them down after each use. Oils and sweat can make them corrode faster. Store your guitar in a case to protect strings from humidity and dust.

How Often Should I Replace My Guitar Strings?

If you play daily, change strings every 2–4 weeks. Occasional players can wait 1–2 months. Replace them when they sound dull, feel rough, or are hard to tune.

Can I Boil Guitar Strings to Clean Them?

Yes, boiling can temporarily remove grime and restore brightness, especially on bass strings. But it weakens the metal, so it’s not a long-term solution and we recommend just buying new strings instead.

Why Do My Guitar Strings Keep Breaking?

Common causes include sharp bridge edges, worn frets, over-tightening, or old strings. Make sure your guitar is properly set up and check for sharp spots.

What are some popular brands of guitar string?

D'Addario, NYXL (by D'Addario), Ernie Ball, Elixir, GHS Strings, Stringjoy, Fender

Steel vs nylon strings – which is better?

Neither is “better”; just better for you and your needs as a guitarist. Steel is for acoustic and electric guitars with bright, strong tones; nylon is for classical guitars and gives a soft, mellow sound.

How much are guitar strings?

Most sets cost between $5 and $20, depending on quality, type, and coating.

What are guitar strings made of?

Guitar strings are made from a variety of materials depending on the type of guitar. Electric guitar strings are usually made of steel, nickel, or stainless steel. Acoustic strings are often made from bronze, phosphor bronze, or brass. Classical guitar strings use nylon or a combination of nylon and silver-plated copper. Each material affects the tone, feel, and durability of the strings.

Can you put electric guitar strings on an acoustic?

Technically yes, but it’s not recommended. Electric guitar strings are made for magnetic pickups and won’t sound right on an acoustic. They also have lower tension, which can affect the guitar’s tone and feel. For the best sound and playability, use acoustic strings on acoustic guitars.

Does acoustic string gauge make a difference?

Yes, it makes a major difference. Lighter gauges are easier to play and better for fingerpicking, but they can sound thinner and break more easily. Heavier gauges produce a fuller, louder sound and are better for strumming, but they’re harder on the fingers and may require a stronger setup.

How do I choose electric strings?

Start by considering your playing style and tone preference. If you want a bright tone and long life, stainless steel is great. For a warmer sound, try pure nickel. Light gauges are easier to play and bend, while heavier gauges offer more sustain and volume. Also, match your string type to your guitar’s scale length and setup.

Strymon Deco V2 -Tape Saturation & Doubletracker

All photos are of the actual product. Learn More

Description
Media Gallery
Downloads

Add warm dimensionality and luscious tape saturation to your signal. Teleport the tones of yesteryear to your board. Effortlessly create a huge range of beautiful, distinctive, and enveloping vintage sounds. Our journey begins with the early recording studios of the ’50s and ’60s. The introduction of reel-to-reel tape machines and the creative engineers that used them brought on some of the fattest sounds imaginable. These early machines really were the first effects pedals — they just wouldn’t have fit on your pedalboard! From the inherent warmth and luscious tape saturation to the forgotten art of how these machines were manipulated, Deco brings this original inspiration back, giving you these vintage tape effects from the earliest recording studios, right on your pedalboard. Deco’s Tape Saturation smooths out your sound with familiar and delicious tape compression and saturation, while fattening your tone with subtle tape-driven transparent overdrive. The Doubletracker provides the power to shift your sound in many ways, easily allowing you to achieve syrupy slapback tape echoes, psychedelic tape flanging, and gorgeous tape chorusing sounds.

Limitless Possibilities. Our new generation of Deco features full MIDI implementation, allowing you to control just about every switch, knob, and setting remotely by sending MIDI commands from your controller or DAW via Deco EXP/MIDI jack or USB-C connection. Lag Time can be synchronized via MIDI Clock Sync, and the sync setting can be saved for each preset. 300 MIDI preset locations are available for loading and saving your favorite settings. Remotely bypass or engage the pedal, sync Lag Time changes along with your tracks, automate knob adjustments, recall unique presets for each song on your setlist — the possibilities with MIDI are limitless.

Choose Your Bypass Mode. Deco lets you choose electromechanical relay switched true bypass for a 100% untouched, unprocessed signal when the pedal is bypassed (this is the default setting), or you can opt for our premium quality buffered bypass that conditions your signal to preserve its integrity by preventing the high end roll-off that can happen due to longer cable runs.

Analog Touch. Uncompromised dynamics and feel. Exceptional touch sensitivity and responsiveness. Deco feels just as good as it sounds, thanks to a high impedance ultra-low noise discrete Class A JFET preamp input.

Moving In Stereo. No need to make compromises when it comes to signal routing or pedal placement — Deco features full stereo in/out capabilities. A single TRS input jack allows Deco to keep its compact form factor while giving you the option to use a stereo input signal. A dedicated rear panel Input switch allows you to easily set Deco for operation with a stereo (TRS) or mono (standard TS) input source. Low impedance dual TS output jacks let you use Deco as a stereo effect.

On Another Level. Pedals aren’t just for guitarists. Deco’s Studio Mode makes it a versatile tool for endless applications from the studio to the stage. By setting Deco to Studio Mode, you get 10dB of added headroom, allowing you to use Deco with bass guitars with active pickups, synthesizers, keyboards, effects loops, and more.

Power To The Pedal. Significant developments in mobile phones and computers have led to an evolution in technology that now allows our pedals to perform more simultaneous processes with less power draw than ever before. That means more processing power for every sonic nuance with less power consumption on your pedal board.

Additional Specifications Include:

High impedance ultra low-noise discrete Class A JFET TRS stereo input.
Low impedance independent TS stereo outputs.
Expression pedal input allows the connection of a TRS expression pedal, MiniSwitch, MultiSwitch Plus, or TRS MIDI connection.
USB jack for controlling via MIDI from a computer or for performing firmware updates.
Dedicated Tape Saturation On/Off & Doubletracker On/Off footswitches
Premium JFET analog front end
Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
520MHz ARM Superscalar processor
32-bit floating point processing
20Hz to 20kHz frequency response
Audio Input Impedance: 1M Ohm
Audio Output Impedance: 100 Ohm
Strong and lightweight anodized silver aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 300mA of current
Dimensions:
4.5” deep x 4” wide x 1.75” tall
11.4 cm deep x 10.2 cm wide x 4.4 cm tall
Designed and built in the USA

For more information on this Strymon pedal, please contact us.

Manufacturer: Strymon

Product Images

Downloads

New

Strymon Deco V2 -Tape Saturation & Doubletracker

$379.00

Condition:: New
UPC:: 852571008264

Quantity:

Current Stock:

Adding to cart… The item has been added

Free Shipping inside lower 48 states

48 Hour Return Policy

You can demo any guitar by making an appointment with our team. Just reach out to us through a message, email, or chat!

Description

Additional Specifications Include:

High impedance ultra low-noise discrete Class A JFET TRS stereo input.
Low impedance independent TS stereo outputs.
Expression pedal input allows the connection of a TRS expression pedal, MiniSwitch, MultiSwitch Plus, or TRS MIDI connection.
USB jack for controlling via MIDI from a computer or for performing firmware updates.
Dedicated Tape Saturation On/Off & Doubletracker On/Off footswitches
Premium JFET analog front end
Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
520MHz ARM Superscalar processor
32-bit floating point processing
20Hz to 20kHz frequency response
Audio Input Impedance: 1M Ohm
Audio Output Impedance: 100 Ohm
Strong and lightweight anodized silver aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 300mA of current
Dimensions:
4.5” deep x 4” wide x 1.75” tall
11.4 cm deep x 10.2 cm wide x 4.4 cm tall
Designed and built in the USA