How many guitar strings are there?

Most standard guitars have six strings. However, some guitars have 7, 8, or even 12 strings for extended range or special styles. For beginners and most players, the six-string setup is the norm and offers all the range needed for most genres

What are the Names of Guitar Strings?

The strings are named based on pitch: E, A, D, G, B, and high E. Starting from the thickest (lowest pitch) to the thinnest (highest pitch), the names go: E, A, D, G, B, E. A common acronym to remember the order of strings from thickest to thinnest is: Eddie Ate Dynamite; Good Bye Eddie.

What is the order of guitar strings?

From the thickest (top when holding the guitar) to the thinnest (bottom), the order is: 6th (Low E), 5th (A), 4th (D), 3rd (G), 2nd (B), 1st (High E). Knowing the order helps with tuning, learning chords, and following guitar tabs.

What are some common materials for guitar strings?

Strings can be made from stainless steel, nickel, nylon, phosphor bronze, flat wound

How to Choose Guitar Strings?

If you play electric guitar, nickel-plated steel strings are the most common and work well for most genres, If you’re into blues or vintage rock, pure nickel gives a warmer tone, Stainless steel is a good pick if you want a sharp, bright sound with less corrosion, For acoustic guitars, phosphor bronze strings offer a rich tone with warmth and brightness, 80/20 bronze strings are another option, giving a brighter, punchier sound, Nylon strings are only for classical guitars or beginner nylon-string acoustics; never use them on a steel-string guitar.

What are winding types for guitar strings?

Roundwound strings, flatwound strings, half-round strings

What are roundwound guitar stirngs?

These are the most common type of winding type for guitar strings. They’re bright and have a textured feel, but can be noisy when fingers slide across.

What are flatwound guitar strings?

Smoother and darker sounding, flatwounds are popular in jazz and blues. They produce less finger noise but feel stiffer. They have a very smooth feel and produce a mellow, warm, and dark tone with less sustain and a more percussive attack.

What are half-wound guitar strings?

These are a middle ground between roundwound and flatwound strings. They offer a smoother feel than roundwounds with more brightness than flatwounds, but can be more expensive.

What type of strings are bass guitar strings?

These are thick, low-tuned strings made for bass guitars. They’re available in roundwound, flatwound, or tapewound.

What type of strings are classical guitar strings?

Classical guitar strings should only be made from nylon, as steel strings can damage a classical guitar’s neck and body.

What type of guitar strings to use on acoustic guitars?

Use bronze or phosphor bronze strings, usually with steel cores. Never use nylon or electric strings on an acoustic.

What type of strings should I use on an electric guitar?

Use nickel or stainless steel strings for an electric guitar. Acoustic-specific strings won’t work properly with magnetic pickups.

What are guitar string sizes or gauges?

String gauge refers to how thick the strings are. Thinner strings are easier to play; thicker ones are louder and more durable. Guitar strings come in extra light or super light (0.008-0.038), light (0.009-0.042), medium (0.01-0.046), and heavy (0.011-0.052)

How do I care for guitar strings?

Keep your strings clean by wiping them down after each use. Oils and sweat can make them corrode faster. Store your guitar in a case to protect strings from humidity and dust.

How Often Should I Replace My Guitar Strings?

If you play daily, change strings every 2–4 weeks. Occasional players can wait 1–2 months. Replace them when they sound dull, feel rough, or are hard to tune.

Can I Boil Guitar Strings to Clean Them?

Yes, boiling can temporarily remove grime and restore brightness, especially on bass strings. But it weakens the metal, so it’s not a long-term solution and we recommend just buying new strings instead.

Why Do My Guitar Strings Keep Breaking?

Common causes include sharp bridge edges, worn frets, over-tightening, or old strings. Make sure your guitar is properly set up and check for sharp spots.

What are some popular brands of guitar string?

D'Addario, NYXL (by D'Addario), Ernie Ball, Elixir, GHS Strings, Stringjoy, Fender

Steel vs nylon strings – which is better?

Neither is “better”; just better for you and your needs as a guitarist. Steel is for acoustic and electric guitars with bright, strong tones; nylon is for classical guitars and gives a soft, mellow sound.

How much are guitar strings?

Most sets cost between $5 and $20, depending on quality, type, and coating.

What are guitar strings made of?

Guitar strings are made from a variety of materials depending on the type of guitar. Electric guitar strings are usually made of steel, nickel, or stainless steel. Acoustic strings are often made from bronze, phosphor bronze, or brass. Classical guitar strings use nylon or a combination of nylon and silver-plated copper. Each material affects the tone, feel, and durability of the strings.

Can you put electric guitar strings on an acoustic?

Technically yes, but it’s not recommended. Electric guitar strings are made for magnetic pickups and won’t sound right on an acoustic. They also have lower tension, which can affect the guitar’s tone and feel. For the best sound and playability, use acoustic strings on acoustic guitars.

Does acoustic string gauge make a difference?

Yes, it makes a major difference. Lighter gauges are easier to play and better for fingerpicking, but they can sound thinner and break more easily. Heavier gauges produce a fuller, louder sound and are better for strumming, but they’re harder on the fingers and may require a stronger setup.

How do I choose electric strings?

Start by considering your playing style and tone preference. If you want a bright tone and long life, stainless steel is great. For a warmer sound, try pure nickel. Light gauges are easier to play and bend, while heavier gauges offer more sustain and volume. Also, match your string type to your guitar’s scale length and setup.

Collings OM1 JL Julian Lage Acoustic guitar with Sitka Spruce & Honduran Mahogany

Case Card for Collings OM1 JL Julian Lage Acoustic guitar with Sitka Spruce & Honduran Mahogany

Case for Collings OM1 JL Julian Lage Acoustic guitar with Sitka Spruce & Honduran Mahogany

All photos are of the actual product. Learn More

Description
Media Gallery
Downloads

The Collings OM1 JL Julian Lage is a study in restraint, touch, and musical intention. Built in collaboration with Julian Lage, this model reflects his pursuit of clarity, nuance, and dynamic control in a traditional OM platform refined to a very personal standard.

At its core is a Sitka spruce top paired with Honduran mahogany back and sides, a classic combination chosen for balance and immediacy. The Sitka brings headroom and articulation, while the mahogany delivers warmth, woody midrange focus, and quick note response. Collings’ Traditional Series build and voicing, along with a custom pre-war scalloped X-brace pattern without a tongue brace, give this guitar an open, broken-in character straight out of the case. It is responsive under a light touch but holds together beautifully when pushed, making it equally suited for intricate fingerstyle and assertive flatpicking.

The custom JL neck carve measures .829" at the first fret and .970" at the ninth, offering a substantial yet comfortable feel that encourages relaxed, confident playing. Combined with the 1 11/16" bone nut, 25 1/2" scale length, and a 14" to 26" compound radius ebony fingerboard with gold MOP short dots, the playability is effortless across the entire register. The mortise and tenon hybrid neck joint and fully adjustable truss rod ensure long-term stability, while medium 18% nickel-silver frets provide a familiar, articulate feel.

Aesthetically, the OM1 JL stays true to its understated roots. Tortoise body binding with custom wood purflings, a custom wood rosette, and a 1-style walnut backstrip give it vintage-inspired character without excess. The ebony peghead veneer with gold MOP Collings script logo, relic nickel Waverly tuners with vintage oval buttons, and ebony bridge with 2 3/16" spacing complete the timeless look. Ebony bridge pins with MOP dots and a tortoise pickguard add subtle finishing touches.

Finished in custom satin nitrocellulose lacquer on both the body and neck, the guitar feels broken-in and alive in the hands. At just 3 lbs 10 oz, it is remarkably lightweight and resonant, measuring 19 1/4" in body length, 15" across the lower bout, and 4 1/8" in depth. It ships with D’Addario NB1253 strings and a deluxe hardshell case.

The OM1 JL is not about flash. It is about touch, tone, and connection. Every detail serves the music.

Other specifications include:

Top Sitka spruce
Back & Sides Honduran mahogany
Construction Traditional Series Build and Voicing
Neck Honduran mahogany
Body Binding Tortoise with custom wood purflings
Fingerboard Binding None
Peghead Binding None
Bridge Ebony belly-style with 2 3/16" spacing
Fingerboard Ebony with gold MOP short dots
Bridge Pins/End Pin Ebony with MOP dot
Nut Bone, 1 11/16"
Saddle Bone, drop-in
Neck Profile Custom JL carve (1st Fret 0.829"/9th Fret 0.970")
Peghead Profile Tapered square
Neck Joint Mortise & tenon hybrid
Truss Rod Fully adjustable
Frets Medium 18% nickel-silver
Peghead Veneer Ebony with gold MOP Collings script logo
Tuners Relic nickel Waverly with vintage oval buttons (16:1 ratio)
Backstrip 1-style (walnut)
Rosette Custom wood rosette
Scale Length 25 1/2"
Brace Material Sitka spruce
Brace Pattern Custom Traditional Series pre-war scalloped X-brace (no tongue brace)
Fingerboard Radius 14" - 26" compound
Body Finish Custom satin nitrocellulose lacquer
Neck Finish Custom satin nitrocellulose lacquer
Pickguard Tortoise
Strings D'Addario NB1253 (.012"- .053")
Body Length 19 1/4"
Body Depth 4 1/8"
Lower Bout Width 15"
Total Length 39 1/2"
Deluxe hardshell case
3 lbs 10 oz
#36436

For more information about the Collings Julian Lage OM1, please contact us.

Manufacturer: Collings
Actual Weight: 3.10
Body Style: OM
Model: OM1 JL
Series: Traditional Series
Condition: Brand New

Product Images

Downloads

New 1 in stock

SKU: 36436

Weight: 3 lbs 10 oz

Collings OM1 JL Julian Lage - Sitka Spruce & Honduran Mahogany #36436

$7,025.00

Condition:: New

Quantity:

Current Stock: 1

Adding to cart… The item has been added

Free Shipping inside lower 48 states

48 Hour Return Policy

You can demo any guitar by making an appointment with our team. Just reach out to us through a message, email, or chat!

Description

The OM1 JL is not about flash. It is about touch, tone, and connection. Every detail serves the music.

Other specifications include:

Top Sitka spruce
Back & Sides Honduran mahogany
Construction Traditional Series Build and Voicing
Neck Honduran mahogany
Body Binding Tortoise with custom wood purflings
Fingerboard Binding None
Peghead Binding None
Bridge Ebony belly-style with 2 3/16" spacing
Fingerboard Ebony with gold MOP short dots
Bridge Pins/End Pin Ebony with MOP dot
Nut Bone, 1 11/16"
Saddle Bone, drop-in
Neck Profile Custom JL carve (1st Fret 0.829"/9th Fret 0.970")
Peghead Profile Tapered square
Neck Joint Mortise & tenon hybrid
Truss Rod Fully adjustable
Frets Medium 18% nickel-silver
Peghead Veneer Ebony with gold MOP Collings script logo
Tuners Relic nickel Waverly with vintage oval buttons (16:1 ratio)
Backstrip 1-style (walnut)
Rosette Custom wood rosette
Scale Length 25 1/2"
Brace Material Sitka spruce
Brace Pattern Custom Traditional Series pre-war scalloped X-brace (no tongue brace)
Fingerboard Radius 14" - 26" compound
Body Finish Custom satin nitrocellulose lacquer
Neck Finish Custom satin nitrocellulose lacquer
Pickguard Tortoise
Strings D'Addario NB1253 (.012"- .053")
Body Length 19 1/4"
Body Depth 4 1/8"
Lower Bout Width 15"
Total Length 39 1/2"
Deluxe hardshell case
3 lbs 10 oz
#36436